以下是悬架系统的类型：
1.多连杆悬架
5连杆后悬架多连杆悬架是一种独立的车辆悬架，每个车轮有三个或更多的控制连杆。
2.刚性轴悬架
刚性轴悬架，也称为实心轴或梁式轴悬架，是一种使用实心梁或轴将车辆车轮连接到车身的车轮悬架。
3.麦弗逊悬架
麦弗逊支柱是一种汽车悬架系统，它使用伸缩式减震器的顶部作为上转向枢轴。它广泛应用于现代车辆的前悬架。
4.独立悬架
独立悬架是指允许同一车轴上的每个车轮独立于其他车轮垂直移动的任何汽车悬架系统。
5.板簧悬架
板簧是一种简单的弹簧形式，通常用于轮式车辆的悬架。最初称为叠片弹簧或滑架弹簧，有时也称为半椭圆弹簧或椭圆弹簧。
6.拖臂悬挂
拖臂悬架，也称为拖杆，是车辆悬架的一种形式。在机动车辆中，它将一个或多个垂直于车轴并位于车轴前方的水平臂放置在底盘或一体式车身上，这些水平臂通过枢轴接头连接到车轴或车轮。
7.双叉骨悬架
双横臂悬架是一种独立的汽车悬架设计，使用两个横臂来定位车轮。
8.空气悬架
空气悬架是一种由电动或发动机驱动的气泵或压缩机提供动力的车辆悬架。这种压缩机将空气泵入柔性波纹管，通常由织物增强橡胶制成。
The following are the Types of Suspension System:
1. Multi-Link Suspension
5-link rear suspension A multi-link suspension is a type of independent vehicle suspension having three or more control links per wheel.
2. Rigid Axle Suspension
Rigid axle suspension, also known as solid axle or beam axle suspension, is a type of wheel suspension that connects a vehicle's wheels to its body using a solid beam or shaft.
3. MacPherson Suspension
The MacPherson strut is a type of automotive suspension system that uses the top of a telescopic damper as the upper steering pivot. It is widely used in the front suspension of modern vehicles.
4. Independent Suspension
Independent suspension is any automobile suspension system that allows each wheel on the same axle to move vertically independently of the others.
5. Leaf Spring Suspension
A leaf spring is a simple form of spring commonly used for suspension in wheeled vehicles. Originally called a laminated or carriage spring, and sometimes referred to as a semi-elliptical spring, or elliptical spring.
6. Trailing Arm Suspension
A trailing-arm suspension, also referred to as trailing-link, is a form of vehicle suspension. In a motor vehicle it places one or more horizontal arms perpendicular to and forward of the axle on the chassis or unibody, which are connected to the axle or wheels with pivot joint.
7. Double Wishbone Suspension
A double wishbone suspension is an independent suspension design for automobiles using two wishbone-shaped arms to locate the wheel.
8. Air Suspension
Air suspension is a type of vehicle suspension powered by an electric or engine-driven air pump or compressor. This compressor pumps the air into flexible bellows, usually made from textile-reinforced rubber.